Product Description
Drillo #Lowca Turbo – Professional Under-Nail Cleaning Carbide Bit
Drillo #Lowca Turbo is a specialist carbide nail drill bit created for precise work underneath built nails and extensions.
This bit is designed to help clean the underside of the nail, remove excess product from the free edge and eliminate the step that can appear after working with forms or upper forms. It is also useful for the first stage of refining uneven product before finishing the shape with a file or sanding band.
The slim working head makes it easier to reach under the nail tunnel and around the underside of the extension without using a bulky bit. It is especially useful for salon work where clean structure, neat free edges and professional finishing are important.
As part of the Drillo Turbo Series, this bit is sharper than standard Drillo bits and is intended for experienced nail technicians who feel confident working with e-file bits. The Turbo series is designed to speed up work and improve efficiency during professional services.
Why Choose Drillo #Lowca Turbo?
- Professional under-nail cleaning drill bit
- Ideal for cleaning the underside of nail extensions
- Helps remove excess product under the free edge
- Helps eliminate the step left after forms or upper forms
- Suitable for initial smoothing of uneven built nails
- Slim 2 mm head for precise work
- Made from carbide
- Part of the Drillo Turbo Series
- Designed for faster professional work
- Suitable for right-handed and left-handed users
- Standard 2.35 mm shank fits most professional e-files
- Can be sterilised in an autoclave
- Recommended for advanced nail technicians
Best For
- Cleaning underneath nail extensions
- Removing product from the underside of the free edge
- Refining the nail tunnel
- Eliminating the step after forms
- Eliminating the step after upper forms
- Smoothing uneven built product
- Professional gel and acrylic gel extensions
- Advanced salon e-file work
- Faster finishing of structured nails
- Professional nail technicians
Product Specifications
| Field | Value |
|---|---|
| Brand | Drillo |
| Product name | #Lowca Turbo |
| Product type | Under-nail cleaning drill bit |
| Category | Carbide nail drill bit |
| Series | Turbo |
| Material | Carbide |
| Total bit length | 38 mm |
| Shank length | 24 mm |
| Head length | 19 mm |
| Head width | 2 mm |
| Shank diameter | 2.35 mm |
| Compatibility | Fits most professional nail drills |
| Recommended speed for step near fingertip | 5,000–15,000 RPM |
| Recommended speed for underside cleaning / surface refining | 15,000–25,000 RPM |
| Sterilisation | Autoclave at 121°C |
| Suitable for | Right-handed and left-handed users |
| Skill level | Advanced |
| SKU | 0010015907167812673 |
| Professional use | Yes |
How to Use
Insert the bit into a compatible professional e-file with a standard 2.35 mm shank.
Use lower speed when working close to the fingertip or when removing the step near the underside of the nail.
Use controlled, light movements when cleaning the underside of the free edge or refining product under the nail.
Do not press too hard. Allow the bit to work with the correct speed and angle.
After use, clean and sterilise according to salon hygiene procedures.
Recommended Speed
| Task | Recommended Speed |
|---|---|
| Removing the step near the fingertip | 5,000–15,000 RPM |
| Cleaning the underside of the nail | 15,000–25,000 RPM |
| Initial refining of built product | 15,000–25,000 RPM |
The manufacturer notes that these values were tested on a MicroNX 300D e-file and may vary depending on the power and type of machine used.
Professional Tip
Use Drillo #Lowca Turbo after building extensions to clean the underside of the free edge and remove excess product before final shaping. For the final refined shape, finish with a file or sanding band.
Because this is a sharp Turbo series bit, work with light pressure and full control.
