UNI BASE

£5.50 - £9.75
(0) Write a Review
Weight:
0.10 KGS

Product Description

Gel polish base. Dedicated to all hard and soft gels and building bases. Increases adhesion to the natural nail plate. You will avoid facelift.


Base does soaking off in acetone.
To remove it, you can use an electric file or an acetone.

This product is intended for natural nails only.


How to use:
1. Mattify the natural nail plate by buffer 100/180
2. Use auxiliary preparations "Nail prep, Step 1 Hessi" and let it evaporate.
3. Use auxiliary preparations "Ultra bond step 2 Hessi" and wait 60 seconds.
4. Apply the base "Uni base Hessi" and cure 60 second in LED/UV dual lamp 48w


How to avoid allergies?
Each product ingredient may cause unwanted allergies.
However, you, as a nail technician, can influence the avoidance of possible allergies.

To avoid allergies, you must remember a few rules:

  • Gel products must not come into contact with the skin. When applying the product, you should work so that the gel does not flow onto the cuticles area;
  • Gel products should be cured for 60 seconds in 48W lamps or longer;
  • You should replace the lamp regularly. The lamp power decreases over time and the products are not fully polymerized. Only uncured products cause allergies. It is recommended to replace the lamp every 6-12 months;
  • Use lamps with a power of not less than 48 watts;
  • You're working too fast. If you remove the product after 30 seconds, the product may not be fully polymerized;

 Curing time: - 120 seconds 36W UV lamp - 60 seconds DUAL LED lamp 48W

 

The Hessi is a Polish brand and is subject to European Union regulations.

This means their products are safe for you and your customers.

The smaller product description was prepared by Jolanta Pałka-Trześniowska and is subject to copyright.